Синие экраны смерти (BSOD) в Windows - 24 страница

fart
F
Новичок
4
0
01/03/2011 в 16:22

Давненько как-то было.

Ноутбук: Acer
Андрей
Администратор
14 061
879
01/03/2011 в 16:50

fart, попробуйте сейчас новую версию.

Ноутбуки: Asus N61Vn, Dell Inspiron 7720 и G3 3779 с Windows 10 64-bit
Dwayne
D
Новичок
10
0
01/03/2011 в 21:29

Снова Добрый Вечер. Переустановил винду, ошибок стало меньше, но появился другой бсод, особенно часто в играх и все из-за одного файла.

[Изображение: abde228c6560.jpg]
[Изображение: dddc53f12bb8.jpg]
[Изображение: 7786c2dd0599.jpg]

Заранее спасибо за помощь

Ноутбук: Acer
Андрей
Администратор
14 061
879
01/03/2011 в 21:49

Dwayne, у вас ноутбук не перегревается?

Ноутбуки: Asus N61Vn, Dell Inspiron 7720 и G3 3779 с Windows 10 64-bit
Dwayne
D
Новичок
10
0
01/03/2011 в 22:31

Нет, температура в норме, сейчас уже не выдает первых ошибок MEMORY_MANAGMENT, а выдает последнюю (последний скрин (0x1000008e))

Подчеркну, что ошибка в основном выскакивает при игре, т.е. играю минут 10 например и синий экран с данной ошибкой.

Ноутбук: Acer
zan227
Z
Новичок
2
0
02/03/2011 в 00:21

недавно столкнулся вот с проблемой проблемой синих экранов. проанализировал дамп и вот что получилось
Analyzing "C:\Windows\Minidump\030111-21091-01.dmp", please wait... Done.

Crash date: Tue Mar 1 21:51:54.210 2011 (UTC + 3:00)
Stop error code: 0x50
Process name: FlylinkDC_x64.
Probably caused by: hardware ( win32k:bLock+1e ) . подскажите в чем проблема и как ее решать???

Ноутбук: Acer
Андрей
Администратор
14 061
879
02/03/2011 в 00:28
Dwayne 02/03/2011 в 02:31 написал:
Нет, температура в норме

Как измеряли и какие температуры?

zan227 02/03/2011 в 04:21 написал:
FlylinkDC

Вот, собственно, и причина.

Ноутбуки: Asus N61Vn, Dell Inspiron 7720 и G3 3779 с Windows 10 64-bit
Dwayne
D
Новичок
10
0
02/03/2011 в 00:37
Андрей 02/03/2011 в 02:28 написал:
Как измеряли и какие температуры?

через HWMonitor

Температура видеокарты 47-48 градусов в покое...
Температура материнской платы около 35 градусов

Ноутбук: Acer
Андрей
Администратор
14 061
879
02/03/2011 в 02:22
Dwayne 02/03/2011 в 04:37 написал:
Температура видеокарты 47-48 градусов в покое...Температура материнской платы около 35 градусов

Зачем мне температуры в покое? Меня интересуют максимальные значения во время игры.

Ноутбуки: Asus N61Vn, Dell Inspiron 7720 и G3 3779 с Windows 10 64-bit
fart
F
Новичок
4
0
02/03/2011 в 15:17
Андрей 01/03/2011 в 16:50 написал:
fart, попробуйте сейчас новую версию.

Да , я слышал ее хвалят. А экран сегодня опять вылез, тот же самый, наверное дело не в Alcohol было?

У меня сегодня еще такое было, включил комп, windows начала загружаться и потом изображение пропало, черный экран и все, на мониторе только надпись- энергосберегающий режим , комп работал. Я ждал, ждал и пришлось принудительно выключить.

Ноутбук: Acer
Dwayne
D
Новичок
10
0
02/03/2011 в 16:05
Андрей 02/03/2011 в 04:22 написал:
Зачем мне температуры в покое? Меня интересуют максимальные значения во время игры.

До 70 градусов

Ноутбук: Acer
zan227
Z
Новичок
2
0
02/03/2011 в 18:38

добрый вечер. сегодня снова пару раз выскакивали синие экраны. вот анализ дампа
Analyzing "C:\Windows\Minidump\030111-15038-01.dmp", please wait... Done.

Crash date: Tue Mar 1 12:18:59.300 2011 (UTC + 3:00)
Stop error code: 0x3B
Process name: explorer.exe
Probably caused by: win32k.sys ( win32kbSpDwmValidateSurface+0 )

Analyzing "C:\Windows\Minidump\022711-22557-01.dmp", please wait... Done.

Crash date: Sun Feb 27 12:20:07.758 2011 (UTC + 3:00)
Stop error code: 0x3B
Process name: FlylinkDC_x64.
Probably caused by: ntkrnlmp.exe ( ntKeWaitForSingleObject+4fd )
FlylinkDC сегодня не запускал вообще.
пожалуйста помогите разобраться.
.

Ноутбук: Acer
Андрей
Администратор
14 061
879
02/03/2011 в 20:47
fart 02/03/2011 в 19:17 написал:
Да , я слышал ее хвалят. А экран сегодня опять вылез, тот же самый, наверное дело не в Alcohol было?

Дело не в Alchohol, дело даже не в Daemon Tools. Дело скорей-всего в драйвере виртуального привода, который ставится вместе с ними.

Dwayne, драйвера обновляли?

Ноутбуки: Asus N61Vn, Dell Inspiron 7720 и G3 3779 с Windows 10 64-bit
Dwayne
D
Новичок
10
0
02/03/2011 в 21:42
Андрей 02/03/2011 в 22:47 написал:
Dwayne, драйвера обновляли?

Да все обновил, дело оказалось в следующем:
Провел тестирование оперативки и выдало следующее:
[Изображение: 1c605906277b.jpg]

Наверное все ошибки из-за этого... Ну или есть предположения что во всем виновата семерка... Буду мастера вызывать

Ноутбук: Acer
BlackRaven
B
Новичок
1
0
04/03/2011 в 03:54

Здравствуйте!!...

Проблема вот в чем!!...Ноуту уже около 4 лет!...В частности ACER Aspire 7520
ломался мене полугода назад!...как сказали сгорела видео карта и мост!!...
Тогда он частенько показывал синий экран!!
Но сейчас каждые 5 мин. при какой либо работе, будь то фильмы, игры,приложения, кулер довольно громко работает!!...
Пытался сделать как у вас написано для синих экранов, немного не получилось....вот скрины!!...
Пожалуйста помогите!!... :'(

Прикрепленные файлы
Ноутбук: Acer ACER Aspire 7520
Андрей
Администратор
14 061
879
04/03/2011 в 05:24

BlackRaven, пробуем переустановить драйвера на звук. Не поможет - прогреваем чипсет Ремонт ноутбука

Ноутбуки: Asus N61Vn, Dell Inspiron 7720 и G3 3779 с Windows 10 64-bit
Potapsvg
P
Новичок
2
0
06/03/2011 в 10:12

Здравствуйте, помогите, купил новый комп, без операционки, установил, XP через пару дней начали вываливаться синие экраны, установил семерку, помогло также на пару дней. Проверял, жесткий, оперативку, менял материнку, переустанавливал винду, проверял на вирусы все бесполезно. Синий экран показывает самые разные ошибки: вот один из BSOD text
Microsoft ® Windows Debugger Version 6.11.0001.404 X86
Copyright © Microsoft Corporation. All rights reserved.

Loading Dump File [C:\WINDOWS\Minidump\Mini020911-04.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: srv*C:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: srv*C:\symbols*http://msdl.microsoft.com/download/symbols
Windows XP Kernel Version 2600 (Service Pack 3) MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 2600.xpsp_sp3_qfe.090804-1456
Machine Name:
Kernel base = 0x804d7000 PsLoadedModuleList = 0x805634c0
Debug session time: Wed Feb 9 11:05:55.125 2011 (GMT+9)
System Uptime: 0 days 0:00:48.097
Loading Kernel Symbols
.

Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.

..............................................................
...........................................
Loading User Symbols
Loading unloaded module list
.............
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1000008E, {c0000005, 805db80f, b3a32bd4, 0}

*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
Probably caused by : ntkrnlmp.exe ( nt!CmpRemoveKeyHash+31 )

Followup: MachineOwner
---------

2: kd> kd: Reading initial command '!analyze -v; q'
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

KERNEL_MODE_EXCEPTION_NOT_HANDLED_M (1000008e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003. This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG. This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG. This will let us see why this breakpoint is
happening.
Arguments:
Arg1: c0000005, The exception code that was not handled
Arg2: 805db80f, The address that the exception occurred at
Arg3: b3a32bd4, Trap Frame
Arg4: 00000000

Debugging Details:
------------------

*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - <Unable to get error code text>

FAULTING_IP:
nt!CmpRemoveKeyHash+31
805db80f 8b08 mov ecx,dword ptr [eax]

TRAP_FRAME: b3a32bd4 -- (.trap 0xffffffffb3a32bd4)
ErrCode = 00000000
eax=00000004 ebx=00000000 ecx=00000000 edx=000002dc esi=e2723740 edi=e1f920a8
eip=805db80f esp=b3a32c48 ebp=b3a32c4c iopl=0 nv up ei pl nz na pe cy
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010207
nt!CmpRemoveKeyHash+0x31:
805db80f 8b08 mov ecx,dword ptr [eax] ds:0023:00000004=????????
Resetting default scope

CUSTOMER_CRASH_COUNT: 4

DEFAULT_BUCKET_ID: COMMON_SYSTEM_FAULT

BUGCHECK_STR: 0x8E

LAST_CONTROL_TRANSFER: from 805db835 to 805db80f

STACK_TEXT:
b3a32c4c 805db835 e2723740 b3a32c6c 805db7ca nt!CmpRemoveKeyHash+0x31
b3a32c58 805db7ca e2723738 e2816be8 e102e154 nt!CmpRemoveKeyControlBlock+0x11
b3a32c6c 805db855 e2723738 e1037b60 80572e74 nt!CmpCleanUpKcbCacheWithLock+0x43
b3a32c78 80572e74 b3a32c8c 80572db5 e2816be8 nt!CmpGetDelayedCloseIndex+0x16
b3a32c80 80572db5 e2816be8 b3a32c98 80572d7e nt!CmpAddToDelayedClose+0xa
b3a32c8c 80572d7e e2816be8 b3a32cb0 8057346d nt!CmpDereferenceKeyControlBlockWithLock+0x50
b3a32c98 8057346d e2816be8 00000000 e2bf24f8 nt!CmpDereferenceKeyControlBlock+0x12
b3a32cb0 8056d73d e2bf2510 00000000 e2bf24f8 nt!CmpDeleteKeyObject+0x92
b3a32ccc 804e1957 e2bf2510 00000000 000001b0 nt!ObpRemoveObjectRoutine+0xe0
b3a32ce4 8056fafd 898506d0 e1dfe8a0 87b569c8 nt!ObfDereferenceObject+0x4c
b3a32cfc 8056fa1b e1dfe8a0 e2bf2510 000001b0 nt!ObpCloseHandleTableEntry+0x155
b3a32d44 8056fa65 000001b0 00000001 00000000 nt!ObpCloseHandle+0x87
b3a32d58 804dd99f 000001b0 00afedc8 7c90e514 nt!NtClose+0x1d
b3a32d58 7c90e514 000001b0 00afedc8 7c90e514 nt!KiFastCallEntry+0xfc
WARNING: Frame IP not in any known module. Following frames may be wrong.
00afedc8 00000000 00000000 00000000 00000000 0x7c90e514

STACK_COMMAND: kb

FOLLOWUP_IP:
nt!CmpRemoveKeyHash+31
805db80f 8b08 mov ecx,dword ptr [eax]

SYMBOL_STACK_INDEX: 0

SYMBOL_NAME: nt!CmpRemoveKeyHash+31

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: nt

IMAGE_NAME: ntkrnlmp.exe

DEBUG_FLR_IMAGE_TIMESTAMP: 4a783d8a

FAILURE_BUCKET_ID: 0x8E_nt!CmpRemoveKeyHash+31

BUCKET_ID: 0x8E_nt!CmpRemoveKeyHash+31

Followup: MachineOwner

Ноутбук: Acer
Андрей
Администратор
14 061
879
06/03/2011 в 11:06

Память и винт на ошибки проверяли?

Ноутбуки: Asus N61Vn, Dell Inspiron 7720 и G3 3779 с Windows 10 64-bit
Potapsvg
P
Новичок
2
0
06/03/2011 в 12:52

да memtest работал 12 часов - ошибок нет, жесткий проверял HDDScan так же проблем нет

Ноутбук: Acer
puxit
P
Новичок
6
0
06/03/2011 в 14:46

установил comodo для 64 битной семёрки,вылез синий экран,как с этим бороться?

провёл восстановление системы,вроде всё норм.Только не понятно почему комодо сломал мне систему...

Ноутбук: Sony Vpcea3s1r
Андрей
Администратор
14 061
879
06/03/2011 в 18:08
puxit 06/03/2011 в 18:46 написал:
Только не понятно почему комодо сломал мне систему...

Что за синий экран вылез? На Comodo ругался?

Potapsvg 06/03/2011 в 16:52 написал:
да memtest работал 12 часов - ошибок нет, жесткий проверял HDDScan так же проблем нет

Значит придется искать проблему в другом. По информации выше я сказать ничего более конкретного не могу так как:

Potapsvg 06/03/2011 в 14:12 написал:
Your debugger is not using the correct symbols
Ноутбуки: Asus N61Vn, Dell Inspiron 7720 и G3 3779 с Windows 10 64-bit
Dima Che
D
Новичок
16
0
13/03/2011 в 14:57

Добрый день
Я - типичный комп-обыватель,ничего не понимаю в настройках.
Путем википедии вычислил что это такое - BSOD
через запрос в яндекс нашел вашу статью,"Как избавиться от синего экрана или BSOD"
все сделал как сказано (два часа возился, с моими то познаниями в железе), но так и не понял, как решить проблему.
Помогите советом, благодарен заранее.Все мои потуги справится в одиночу в прикрепленных файлах и минидамп тоже.
Спасибо!

Прикрепленные файлы
.dmp mini031311-01.dmp [88 Кб]
Модель ноутбука не указана
Андрей
Администратор
14 061
879
13/03/2011 в 15:14

Dima Che, память и винт на ошибки проверяйте

Ноутбуки: Asus N61Vn, Dell Inspiron 7720 и G3 3779 с Windows 10 64-bit
Dima Che
D
Новичок
16
0
13/03/2011 в 22:43

Андрей,
я научился записывать образы дисков, заходить в биос,запускаться с диска, тестировать память и винт с помощью этих замечательных программ.
Но ошибок не нашел.
Поделитесь опытом,помогите.
Оговорюсь,у меня не ноутбук,а обычный ПК.
те файлы, что я прикрепил в предыдущем сообщении, что-нибудь говорят?
фотка BSOD была сделана немного ранее моих потугов решить проблему...так что там сфоткан не именно тот синий экран смерти,который я тестировал с помощью программки, а другой, который был чуть ранее...
если кто-то знает в чем дело,напишите
спасибо

Модель ноутбука не указана
Андрей
Администратор
14 061
879
13/03/2011 в 23:02

Dima Che, когда синий экран появляется?

Dima 14/03/2011 в 02:43 написал:
те файлы, что я прикрепил в предыдущем сообщении, что-нибудь говорят?

Нет

Ноутбуки: Asus N61Vn, Dell Inspiron 7720 и G3 3779 с Windows 10 64-bit
Тему читают: гостей: 13
Быстрый переход:

Статьи с решениями различных проблем с Windows

Наверх ↑